12 Tips to Extend the Life of Your Headphones

We use headphones and earbuds for almost everything in the world today. We wear them to keep ourselves busy and to talk to each other.

If they suddenly stop working, you won’t be able to watch movies, play video games, listen to podcasts, or hear phone calls. Do you ever wonder why your headphones keep getting broken?

There are, luckily, a lot of very effective ways to keep your headphones in good shape. The key is to know how to keep them safe from things that could hurt them.

Here are 12 tips that will help you make your headphones last longer.

1. Clean your headphones.

Many people think that their headphones are broken for good because the sound quality has gotten much worse. When all they really need is to be taken care of. We suggest that you clean your headphones often, whether they go over your ears or sit on your ears. Getting rid of too much dirt from your ears is not only good for your health, but it may also make your headphones sound better.

When earwax builds up, it can make sound less loud and less clear. There are many ways to clean headphones that go over the ears. Some headphones have ear cups and cords that can be taken off to make them easier to clean. Make sure to clean and maintain your headphones regularly so you can get the most out of them and keep them for a long time.

How to Keep Your Headphones Clean

Check the official website of the maker before you start cleaning to see if there are any other steps or instructions. To clean your headphones, you’ll need the following:

  • A soft fabric
  • Warm water
  • Soap for washing dishes
  • Isopropyl (rubbing) alcohol
  • Hydrogen peroxide
  • Useless toothbrush

Wet a soft cloth with warm water and dish soap. If your earbuds or headphones have plastic tips or pads that can be taken off, take them off and clean them separately. You don’t want any liquid to get inside the electronics. Use the cloth to clean all of the parts, including the wires, and let them dry completely. If there is a lot of dirt on the mesh, scrub it gently with an old toothbrush. Mounting putty will help get the dirt out of those tight spots. Do the same thing several times. Hydrogen peroxide or rubbing alcohol with a low concentration can also help loosen grime, but you should only use a small amount and dry the area well afterward. Our guide on how to clean earbuds that don’t work well tells you everything you need to know.

2.Keep your headphones dry

With so many water-resistant and waterproof headphones on the market today, it may not seem important to keep them dry. But even the most water-resistant and waterproof headphones can get too wet over time, even if they are designed to do so. If your headphones get wet or get too much moisture inside, it could damage the parts inside and cause them to stop working.

How to Deal With Wet Headphones

If your headphones fall into water, take them off as soon as you can. Ear pads, foam, or silicone ear tips that can be taken off should be removed. Shake your headphones to get rid of any extra drops of water. Use a towel or cloth that can soak up water to dry them as soon as possible. Taking this action right away can help keep the headphones’ internal parts from getting damaged for good.

If any of the parts inside the headphones get wet, you may need to use a pry tool to open them.

At least 24 hours should pass before you can use it again. You can speed up the drying process and get rid of the water droplets by using a can of compressed air. By following these tips, the process will go faster because the moisture in the circuitry will dry out more quickly.

3.Don’t let headphones get too hot or too cold.

We’ve all done it: left our headphones in a hot or cold car while it was parked. Did you know that doing this can hurt the parts inside your headphones? Manufacturers of headphones say that you shouldn’t charge or store your headphones in hot or cold places.

Low or high temperatures can make electronics break down and shorten the life of lithium-ion batteries in a way that can’t be fixed. Use your headphones when the temperature around you is between 0°C and 35°C, or 32°F and 95°F.

How to Keep Headphones from Getting Too Hot or Cold

Here are some things to keep in mind to keep your headphones safe from extreme temperatures:

  • Don’t charge your headphones when it’s too hot or too cold.
  • Do not leave headphones out in the sun for long periods of time.
  • On a hot day, don’t leave headphones in the car.
  • Charge your headphones with the right charger.
  • Avoid using it for long hours at a time.

4.Get headphones that fit well

We all have different shaped heads and different ideas about what makes us feel good. Some people like headphones that fit tight and don’t fall off easily, while others like headphones that fit loose and don’t press too hard on the ears. Make sure the headphones you choose fit the shape of your head and how you like to wear them. If your headphones are too small, they are more likely to bend and break. On the other hand, if your headphones are too big for your head, they may fall off and break on the floor.

How to Choose the Right Headphones

Follow these steps to make sure your headphones fit right:

  1. Don’t wear headphones that are too big for you and how you like to wear them.
  2. Don’t put on headphones that are too small for the size of your head.
  3. Wear your headphones in the right way, especially if you’re moving around.
  4. Change the size of your headphones to get the right fit and more comfort.

5.Don’t go on a trip without a bag

We all want to make sure our brand-new headphones stay in good shape. Keeping this in mind, a headphone carrying case is one of the best ways to keep your headphones safe. The most common ways to break headphones are by handling them wrong or dropping them.

If you’re lucky, the worst thing that can happen is that the body and cable of your headphones get a few scratches and scuffs. But if you drop them on a hard surface, internal parts may get broken and stop working. Especially if you’re a serious audiophile with expensive headphones, you don’t want this to happen.

So, you might want to buy a case for your audio equipment to keep it safe from damage. Cases also do more than just keep your headphones safe. Some can charge your headphones, while others have extra pockets for cords and other accessories.

How to Choose the Best Case for Your Headphones

Before you buy a case for your headphones, here are a few things to think about.

  • Choose a case that is small and easy to carry.
  • If you are active, think about getting a case that is strong and has a lot of padding.
  • A well-made case with a well-padded inside is a must.
  • Choose a case with lots of straps and pockets to store your things.
  • If you like to travel, you might want to get a case that doesn’t get wet.

6.Don’t let your headphones’ cables break.

Most people today use wireless headphones and earbuds when they want to listen to music on the go. On the other hand, some people like wired headphones because they are cheaper, don’t need to be charged, and sound better.

On the other hand, wired headphones have a cord that, if not wrapped carefully, could shorten their life by several years. It’s a common mistake to quickly and carelessly wrap the cable around the headphones when they’re not being used. Cable wires are the most likely to break, and if you don’t handle them right, they can break inside.

How to wrap headphones so they don’t break

You’ve come to the right place if you’ve been looking for a way to keep your headphones from getting tangled. We’ve found the best way to wrap headphone cords so they don’t get knotted up. This is the best and easiest way to wrap headphones cables:

  • Let the cord hang down toward the ground.
  • Loop the cable around in a circle.
  • Every other circle should be turned the other way.
  • Keep going until the whole cord is looped.

7.Don’t tug on the cable

Many people disconnect their wired headphones and earbuds from their phones, tablets, and computers by pulling the cable. Some people get used to them so much that they forget they are even wearing them. As they walk away from their device, their headphones fall out of their ears. When you pull your headphones out this way, you put a lot of pressure on the plug that goes into your device. Because of this, the wires may get frayed, and your sound may stop working in one or both ears.

How to Take Cables Off Headphones

The safest way to take your headphones off your device is to:

  • Grab the earphone jack with one hand.
  • Use your other hand to keep the thing in place.
  • Carefully pull the earphone jack out of the smartphone.

8.Regularly charge wireless headphones

You’re ready to listen to your favorite podcast when you notice that the battery in your headphones is dead. When you try to charge it, nothing happens. Most people don’t know that if the battery in your headphones dies, it can be hard to change it yourself. The batteries for the headphones are built into the device, which makes them hard to get to.

Did you know that the battery in your headphones will last longer if you keep them fully charged? Don’t worry that you’ll charge too much. It’s not likely that lithium-ion batteries will be overcharged. The longest they’ll last is if you charge them before the battery goes below 20%. You will get a lot more use out of your wireless headphones if you do this.

9.Don’t put your headphones on your lap

It might seem like sitting on your headphones is something you should never do. Over-ear headphones and earbuds, on the other hand, often break or crack by accident. This happens when someone puts them in their back pocket or accidentally puts something heavy on top of them.

How to keep from putting your headphones on your lap

Here are some ways to keep your headphones from getting broken.

  • Put your headphones in a place that is safe.
  • Put your headphones in a case to protect them.
  • Don’t put your headphones in your back pocket.
  • Before you sit down near your devices, always look down.

10.Don’t go to sleep with your headphones on.

We’ve all fallen asleep at some point while wearing headphones. Not only can this keep you from sleeping, but your head’s weight (about 10 to 11 pounds) can break the headband in two. Also, turning and rolling in bed can pull on the cable and put too much pressure on the ear cups, which can damage them.

The same thing happens if you forget your headphones are on your head or in your ears while running errands. This is another reason why we lose our headphones and they fall to the ground.

If you remember to take off your headphones before you go to sleep or run errands, you won’t have to buy a new, more expensive pair.

11.Keep Track Of Your Headphones

With earbuds, you can listen to a good playlist while you’re on the go. They are small enough to fit in your pocket, portable, and easy to take with you wherever you go. The problem is that they are just as easy to lose. Over-ear headphones can also go missing, especially if you forget to put them back where they belong after using them. They could be used by someone else without your permission. If that happens, those expensive headphones you bought could be gone for good.

How to keep headphones and earbuds from getting lost

Here are some things you can do to keep your headphones from getting lost:

  • Have a place set aside for headphones.
  • Have more than one set of earbuds so you can use them in different places.
  • Use a tracker for your earbuds.
  • When you’re not using your earbuds, keep them in the case.
  • Use headphones that go over your ears instead of earbuds.
  • Go back the way you came.

12.Don’t buy headphones that are cheap.

When you need new headphones, it’s easy to be tempted to buy the first pair you see for sale. But price alone shouldn’t be the only thing you think about. Some models are very cheap but look like they are made well. Many are made with cheap parts that aren’t put together well. If you don’t do your homework, you’ll probably end up with headphones that don’t have the features you want and won’t last long. There are many models on the market that are easy on the wallet and have great sound and durability.

How to Pick the Best Earbuds and Headphones

Here are some things you should look for in headphones to get the most out of them:

  • Headphones that make good sound.
  • Headphones or earbuds that are well-made and will last.
  • Headphones with a battery life that’s not too bad.
  • The ones with the longest range are Bluetooth headphones.
  • Headphones with a mic that can be used with a wire or with Bluetooth.
  • Headphones with a cable that can be taken off and a 3.5mm plug.
  • Headphones that can be folded up.
  • Headphones that can handle water up to IP55.

 

12 Tips to Extend the Life of Your Headphones

Leave a Reply

Your email address will not be published.

Scroll to top